Why can't I make use of tcltk in this installation?

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Why can't I make use of tcltk in this installation?

Patrick Connolly-4
> sessionInfo()
R version 3.5.0 (2018-04-23)
Platform: x86_64-pc-linux-gnu (64-bit)
Running under: Ubuntu 14.04.5 LTS

Matrix products: default
BLAS: /home/pat/local/R-3.5.0/lib/libRblas.so
LAPACK: /home/pat/local/R-3.5.0/lib/libRlapack.so

locale:
 [1] LC_CTYPE=en_NZ.UTF-8       LC_NUMERIC=C              
 [3] LC_TIME=en_NZ.UTF-8        LC_COLLATE=en_NZ.UTF-8    
 [5] LC_MONETARY=en_NZ.UTF-8    LC_MESSAGES=en_NZ.UTF-8  
 [7] LC_PAPER=en_NZ.UTF-8       LC_NAME=C                
 [9] LC_ADDRESS=C               LC_TELEPHONE=C            
[11] LC_MEASUREMENT=en_NZ.UTF-8 LC_IDENTIFICATION=C      

attached base packages:
[1] utils     stats     grDevices graphics  methods   base    

other attached packages:
[1] lattice_0.20-35

loaded via a namespace (and not attached):
 [1] Rcpp_0.12.17     dplyr_0.7.6      assertthat_0.2.0 grid_3.5.0      
 [5] R6_2.2.2         magrittr_1.5     pillar_1.2.3     rlang_0.2.1    
 [9] bindrcpp_0.2.2   tools_3.5.0      glue_1.2.0       purrr_0.2.5    
[13] compiler_3.5.0   pkgconfig_2.0.1  bindr_0.1.1      tidyselect_0.2.4
[17] tibble_1.4.2    
> capabilities()
       jpeg         png        tiff       tcltk         X11        aqua
       TRUE        TRUE        TRUE       FALSE        TRUE       FALSE
   http/ftp     sockets      libxml        fifo      cledit       iconv
       TRUE        TRUE        TRUE        TRUE       FALSE        TRUE
        NLS     profmem       cairo         ICU long.double     libcurl
       TRUE       FALSE        TRUE        TRUE        TRUE        TRUE
>

If I try to load tcltk, no surprise...

> require(tcltk)
Loading required package: tcltk
Error: package or namespace load failed for ‘tcltk’:
 .onLoad failed in loadNamespace() for 'tcltk', details:
  call: fun(libname, pkgname)
  error: Tcl/Tk support is not available on this system
Warning message:
S3 methods ‘as.character.tclObj’, ‘as.character.tclVar’, ‘as.double.tclObj’, ‘as.integer.tclObj’, ‘as.logical.tclObj’, ‘as.raw.tclObj’, ‘print.tclObj’, ‘[[.tclArray’, ‘[[<-.tclArray’, ‘$.tclArray’, ‘$<-.tclArray’, ‘names.tclArray’, ‘names<-.tclArray’, ‘length.tclArray’, ‘length<-.tclArray’, ‘tclObj.tclVar’, ‘tclObj<-.tclVar’, ‘tclvalue.default’, ‘tclvalue.tclObj’, ‘tclvalue.tclVar’, ‘tclvalue<-.default’, ‘tclvalue<-.tclVar’, ‘close.tkProgressBar’ were declared in NAMESPACE but not found
>

The question is:  What do I have to do to get Tcl/Tk support?
From the bash prompt:
 > aptitude search tcltk
p   hfsutils-tcltk             - Tcl/Tk interfaces for reading and writing Macintosh volumes
p   hfsutils-tcltk:i386        - Tcl/Tk interfaces for reading and writing Macintosh volumes
p   libtcltk-ruby              - Tcl/Tk interface for Ruby          
p   libtcltk-ruby1.9.1         - Tcl/Tk interface for Ruby 1.9.1
p   libtcltk-ruby1.9.1:i386    - Tcl/Tk interface for Ruby 1.9.1
p   r-cran-tcltk2              - GNU R package for Tcl/Tk additions
p   ruby2.0-tcltk              - Ruby/Tk for Ruby 2.0
p   ruby2.0-tcltk:i386         - Ruby/Tk for Ruby 2.0  

That's the same as what I get on another computer on which tcktl is
available, so it didn't surprise me when installing the r-cran-tcktl
package didn't help.

Where else should I be looking for a difference?

TIA


--
~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.  
   ___    Patrick Connolly  
 {~._.~}                   Great minds discuss ideas    
 _( Y )_           Average minds discuss events
(:_~*~_:)                  Small minds discuss people  
 (_)-(_)                        ..... Eleanor Roosevelt
         
~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Why can't I make use of tcltk in this installation?

Albrecht Kauffmann-2
Hi Patrick,

did you give the compiler path instructions to tclConfig.sh and tkConfig.sh , as

../R-3.5.1/configure  --with-tcl-config=/usr/lib64/tclConfig.sh --with-tk-config=/usr/lib64/tkConfig.sh

?

Best,
Albrecht

--
  Albrecht Kauffmann
  [hidden email]

Am Mo, 10. Sep 2018, um 10:54, schrieb Patrick Connolly:

> > sessionInfo()
> R version 3.5.0 (2018-04-23)
> Platform: x86_64-pc-linux-gnu (64-bit)
> Running under: Ubuntu 14.04.5 LTS
>
> Matrix products: default
> BLAS: /home/pat/local/R-3.5.0/lib/libRblas.so
> LAPACK: /home/pat/local/R-3.5.0/lib/libRlapack.so
>
> locale:
>  [1] LC_CTYPE=en_NZ.UTF-8       LC_NUMERIC=C              
>  [3] LC_TIME=en_NZ.UTF-8        LC_COLLATE=en_NZ.UTF-8    
>  [5] LC_MONETARY=en_NZ.UTF-8    LC_MESSAGES=en_NZ.UTF-8  
>  [7] LC_PAPER=en_NZ.UTF-8       LC_NAME=C                
>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
> [11] LC_MEASUREMENT=en_NZ.UTF-8 LC_IDENTIFICATION=C      
>
> attached base packages:
> [1] utils     stats     grDevices graphics  methods   base    
>
> other attached packages:
> [1] lattice_0.20-35
>
> loaded via a namespace (and not attached):
>  [1] Rcpp_0.12.17     dplyr_0.7.6      assertthat_0.2.0 grid_3.5.0      
>  [5] R6_2.2.2         magrittr_1.5     pillar_1.2.3     rlang_0.2.1    
>  [9] bindrcpp_0.2.2   tools_3.5.0      glue_1.2.0       purrr_0.2.5    
> [13] compiler_3.5.0   pkgconfig_2.0.1  bindr_0.1.1      tidyselect_0.2.4
> [17] tibble_1.4.2    
> > capabilities()
>        jpeg         png        tiff       tcltk         X11        aqua
>        TRUE        TRUE        TRUE       FALSE        TRUE       FALSE
>    http/ftp     sockets      libxml        fifo      cledit       iconv
>        TRUE        TRUE        TRUE        TRUE       FALSE        TRUE
>         NLS     profmem       cairo         ICU long.double     libcurl
>        TRUE       FALSE        TRUE        TRUE        TRUE        TRUE
> >
>
> If I try to load tcltk, no surprise...
>
> > require(tcltk)
> Loading required package: tcltk
> Error: package or namespace load failed for ‘tcltk’:
>  .onLoad failed in loadNamespace() for 'tcltk', details:
>   call: fun(libname, pkgname)
>   error: Tcl/Tk support is not available on this system
> Warning message:
> S3 methods ‘as.character.tclObj’, ‘as.character.tclVar’,
> ‘as.double.tclObj’, ‘as.integer.tclObj’, ‘as.logical.tclObj’,
> ‘as.raw.tclObj’, ‘print.tclObj’, ‘[[.tclArray’, ‘[[<-.tclArray’,
> ‘$.tclArray’, ‘$<-.tclArray’, ‘names.tclArray’, ‘names<-.tclArray’,
> ‘length.tclArray’, ‘length<-.tclArray’, ‘tclObj.tclVar’,
> ‘tclObj<-.tclVar’, ‘tclvalue.default’, ‘tclvalue.tclObj’,
> ‘tclvalue.tclVar’, ‘tclvalue<-.default’, ‘tclvalue<-.tclVar’,
> ‘close.tkProgressBar’ were declared in NAMESPACE but not found
> >
>
> The question is:  What do I have to do to get Tcl/Tk support?
> From the bash prompt:
>  > aptitude search tcltk
> p   hfsutils-tcltk             - Tcl/Tk interfaces for reading and
> writing Macintosh volumes
> p   hfsutils-tcltk:i386        - Tcl/Tk interfaces for reading and
> writing Macintosh volumes
> p   libtcltk-ruby              - Tcl/Tk interface for Ruby          
> p   libtcltk-ruby1.9.1         - Tcl/Tk interface for Ruby 1.9.1
> p   libtcltk-ruby1.9.1:i386    - Tcl/Tk interface for Ruby 1.9.1
> p   r-cran-tcltk2              - GNU R package for Tcl/Tk additions
> p   ruby2.0-tcltk              - Ruby/Tk for Ruby 2.0
> p   ruby2.0-tcltk:i386         - Ruby/Tk for Ruby 2.0  
>
> That's the same as what I get on another computer on which tcktl is
> available, so it didn't surprise me when installing the r-cran-tcktl
> package didn't help.
>
> Where else should I be looking for a difference?
>
> TIA
>
>
> --
> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.  
>    ___    Patrick Connolly  
>  {~._.~}                   Great minds discuss ideas    
>  _( Y )_           Average minds discuss events
> (:_~*~_:)                  Small minds discuss people  
>  (_)-(_)                        ..... Eleanor Roosevelt
>  
> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Why can't I make use of tcltk in this installation?

Peter Dalgaard-2
You may need to consult the R-sig-debian list, rather than R-help.

Offhand, I would expect that you need Tcl libraries, Tk libraries and the associated -devel or -dev packages. Notice that although they are designed to work together, Tcl and Tk are two separate entities, so searching for tcltk may not suffice.

-pd

> On 10 Sep 2018, at 12:37 , Albrecht Kauffmann <[hidden email]> wrote:
>
> Hi Patrick,
>
> did you give the compiler path instructions to tclConfig.sh and tkConfig.sh , as
>
> ../R-3.5.1/configure  --with-tcl-config=/usr/lib64/tclConfig.sh --with-tk-config=/usr/lib64/tkConfig.sh
>
> ?
>
> Best,
> Albrecht
>
> --
>  Albrecht Kauffmann
>  [hidden email]
>
> Am Mo, 10. Sep 2018, um 10:54, schrieb Patrick Connolly:
>>> sessionInfo()
>> R version 3.5.0 (2018-04-23)
>> Platform: x86_64-pc-linux-gnu (64-bit)
>> Running under: Ubuntu 14.04.5 LTS
>>
>> Matrix products: default
>> BLAS: /home/pat/local/R-3.5.0/lib/libRblas.so
>> LAPACK: /home/pat/local/R-3.5.0/lib/libRlapack.so
>>
>> locale:
>> [1] LC_CTYPE=en_NZ.UTF-8       LC_NUMERIC=C              
>> [3] LC_TIME=en_NZ.UTF-8        LC_COLLATE=en_NZ.UTF-8    
>> [5] LC_MONETARY=en_NZ.UTF-8    LC_MESSAGES=en_NZ.UTF-8  
>> [7] LC_PAPER=en_NZ.UTF-8       LC_NAME=C                
>> [9] LC_ADDRESS=C               LC_TELEPHONE=C            
>> [11] LC_MEASUREMENT=en_NZ.UTF-8 LC_IDENTIFICATION=C      
>>
>> attached base packages:
>> [1] utils     stats     grDevices graphics  methods   base    
>>
>> other attached packages:
>> [1] lattice_0.20-35
>>
>> loaded via a namespace (and not attached):
>> [1] Rcpp_0.12.17     dplyr_0.7.6      assertthat_0.2.0 grid_3.5.0      
>> [5] R6_2.2.2         magrittr_1.5     pillar_1.2.3     rlang_0.2.1    
>> [9] bindrcpp_0.2.2   tools_3.5.0      glue_1.2.0       purrr_0.2.5    
>> [13] compiler_3.5.0   pkgconfig_2.0.1  bindr_0.1.1      tidyselect_0.2.4
>> [17] tibble_1.4.2    
>>> capabilities()
>>       jpeg         png        tiff       tcltk         X11        aqua
>>       TRUE        TRUE        TRUE       FALSE        TRUE       FALSE
>>   http/ftp     sockets      libxml        fifo      cledit       iconv
>>       TRUE        TRUE        TRUE        TRUE       FALSE        TRUE
>>        NLS     profmem       cairo         ICU long.double     libcurl
>>       TRUE       FALSE        TRUE        TRUE        TRUE        TRUE
>>>
>>
>> If I try to load tcltk, no surprise...
>>
>>> require(tcltk)
>> Loading required package: tcltk
>> Error: package or namespace load failed for ‘tcltk’:
>> .onLoad failed in loadNamespace() for 'tcltk', details:
>>  call: fun(libname, pkgname)
>>  error: Tcl/Tk support is not available on this system
>> Warning message:
>> S3 methods ‘as.character.tclObj’, ‘as.character.tclVar’,
>> ‘as.double.tclObj’, ‘as.integer.tclObj’, ‘as.logical.tclObj’,
>> ‘as.raw.tclObj’, ‘print.tclObj’, ‘[[.tclArray’, ‘[[<-.tclArray’,
>> ‘$.tclArray’, ‘$<-.tclArray’, ‘names.tclArray’, ‘names<-.tclArray’,
>> ‘length.tclArray’, ‘length<-.tclArray’, ‘tclObj.tclVar’,
>> ‘tclObj<-.tclVar’, ‘tclvalue.default’, ‘tclvalue.tclObj’,
>> ‘tclvalue.tclVar’, ‘tclvalue<-.default’, ‘tclvalue<-.tclVar’,
>> ‘close.tkProgressBar’ were declared in NAMESPACE but not found
>>>
>>
>> The question is:  What do I have to do to get Tcl/Tk support?
>> From the bash prompt:
>>> aptitude search tcltk
>> p   hfsutils-tcltk             - Tcl/Tk interfaces for reading and
>> writing Macintosh volumes
>> p   hfsutils-tcltk:i386        - Tcl/Tk interfaces for reading and
>> writing Macintosh volumes
>> p   libtcltk-ruby              - Tcl/Tk interface for Ruby          
>> p   libtcltk-ruby1.9.1         - Tcl/Tk interface for Ruby 1.9.1
>> p   libtcltk-ruby1.9.1:i386    - Tcl/Tk interface for Ruby 1.9.1
>> p   r-cran-tcltk2              - GNU R package for Tcl/Tk additions
>> p   ruby2.0-tcltk              - Ruby/Tk for Ruby 2.0
>> p   ruby2.0-tcltk:i386         - Ruby/Tk for Ruby 2.0  
>>
>> That's the same as what I get on another computer on which tcktl is
>> available, so it didn't surprise me when installing the r-cran-tcktl
>> package didn't help.
>>
>> Where else should I be looking for a difference?
>>
>> TIA
>>
>>
>> --
>> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.  
>>   ___    Patrick Connolly  
>> {~._.~}                   Great minds discuss ideas    
>> _( Y )_           Average minds discuss events
>> (:_~*~_:)                  Small minds discuss people  
>> (_)-(_)                        ..... Eleanor Roosevelt
>>  
>> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
>>
>> ______________________________________________
>> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

--
Peter Dalgaard, Professor,
Center for Statistics, Copenhagen Business School
Solbjerg Plads 3, 2000 Frederiksberg, Denmark
Phone: (+45)38153501
Office: A 4.23
Email: [hidden email]  Priv: [hidden email]

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Why can't I make use of tcltk in this installation?

Patrick Connolly-4
In reply to this post by Albrecht Kauffmann-2
Hello Albrecht.

I didn't specify those paths on the 3 machines that have tcltk
available.  It appears that those files are not on the machine in
question and that is the reason for my problem.  But if they are,
./configure finds them itself.

I'm not at the machine that has the issue, but I assume that since I get
this on a machine that does work:

> dpkg -S tkConfig.sh
tk8.6-dev:amd64: /usr/lib/x86_64-linux-gnu/tk8.6/tkConfig.sh
tk8.6-dev:amd64: /usr/lib/tk8.6/tkConfig.sh
tk-dev:amd64: /usr/lib/x86_64-linux-gnu/tkConfig.sh
tk-dev:amd64: /usr/lib/tkConfig.sh

I need to install those two packages (and the corresponding ones for
tcl) and reinstall R.

Thanks for the pointer, and thank you pd for drawing my attention to the
fact that Tcl and Tk need to be done separately.




On 2018-09-10 22:37, Albrecht Kauffmann wrote:

> Hi Patrick,
>
> did you give the compiler path instructions to tclConfig.sh and
> tkConfig.sh , as
>
> ../R-3.5.1/configure  --with-tcl-config=/usr/lib64/tclConfig.sh
> --with-tk-config=/usr/lib64/tkConfig.sh
>
> ?
>
> Best,
> Albrecht
>
> --
>   Albrecht Kauffmann
>   [hidden email]
>
> Am Mo, 10. Sep 2018, um 10:54, schrieb Patrick Connolly:
>> > sessionInfo()
>> R version 3.5.0 (2018-04-23)
>> Platform: x86_64-pc-linux-gnu (64-bit)
>> Running under: Ubuntu 14.04.5 LTS
>>
>> Matrix products: default
>> BLAS: /home/pat/local/R-3.5.0/lib/libRblas.so
>> LAPACK: /home/pat/local/R-3.5.0/lib/libRlapack.so
>>
>> locale:
>>  [1] LC_CTYPE=en_NZ.UTF-8       LC_NUMERIC=C
>>  [3] LC_TIME=en_NZ.UTF-8        LC_COLLATE=en_NZ.UTF-8
>>  [5] LC_MONETARY=en_NZ.UTF-8    LC_MESSAGES=en_NZ.UTF-8
>>  [7] LC_PAPER=en_NZ.UTF-8       LC_NAME=C
>>  [9] LC_ADDRESS=C               LC_TELEPHONE=C
>> [11] LC_MEASUREMENT=en_NZ.UTF-8 LC_IDENTIFICATION=C
>>
>> attached base packages:
>> [1] utils     stats     grDevices graphics  methods   base
>>
>> other attached packages:
>> [1] lattice_0.20-35
>>
>> loaded via a namespace (and not attached):
>>  [1] Rcpp_0.12.17     dplyr_0.7.6      assertthat_0.2.0 grid_3.5.0
>>  [5] R6_2.2.2         magrittr_1.5     pillar_1.2.3     rlang_0.2.1
>>  [9] bindrcpp_0.2.2   tools_3.5.0      glue_1.2.0       purrr_0.2.5
>> [13] compiler_3.5.0   pkgconfig_2.0.1  bindr_0.1.1      
>> tidyselect_0.2.4
>> [17] tibble_1.4.2
>> > capabilities()
>>        jpeg         png        tiff       tcltk         X11        
>> aqua
>>        TRUE        TRUE        TRUE       FALSE        TRUE      
>> FALSE
>>    http/ftp     sockets      libxml        fifo      cledit      
>> iconv
>>        TRUE        TRUE        TRUE        TRUE       FALSE        
>> TRUE
>>         NLS     profmem       cairo         ICU long.double    
>> libcurl
>>        TRUE       FALSE        TRUE        TRUE        TRUE        
>> TRUE
>> >
>>
>> If I try to load tcltk, no surprise...
>>
>> > require(tcltk)
>> Loading required package: tcltk
>> Error: package or namespace load failed for ‘tcltk’:
>>  .onLoad failed in loadNamespace() for 'tcltk', details:
>>   call: fun(libname, pkgname)
>>   error: Tcl/Tk support is not available on this system
>> Warning message:
>> S3 methods ‘as.character.tclObj’, ‘as.character.tclVar’,
>> ‘as.double.tclObj’, ‘as.integer.tclObj’, ‘as.logical.tclObj’,
>> ‘as.raw.tclObj’, ‘print.tclObj’, ‘[[.tclArray’, ‘[[<-.tclArray’,
>> ‘$.tclArray’, ‘$<-.tclArray’, ‘names.tclArray’, ‘names<-.tclArray’,
>> ‘length.tclArray’, ‘length<-.tclArray’, ‘tclObj.tclVar’,
>> ‘tclObj<-.tclVar’, ‘tclvalue.default’, ‘tclvalue.tclObj’,
>> ‘tclvalue.tclVar’, ‘tclvalue<-.default’, ‘tclvalue<-.tclVar’,
>> ‘close.tkProgressBar’ were declared in NAMESPACE but not found
>> >
>>
>> The question is:  What do I have to do to get Tcl/Tk support?
>> From the bash prompt:
>>  > aptitude search tcltk
>> p   hfsutils-tcltk             - Tcl/Tk interfaces for reading and
>> writing Macintosh volumes
>> p   hfsutils-tcltk:i386        - Tcl/Tk interfaces for reading and
>> writing Macintosh volumes
>> p   libtcltk-ruby              - Tcl/Tk interface for Ruby
>> p   libtcltk-ruby1.9.1         - Tcl/Tk interface for Ruby 1.9.1
>> p   libtcltk-ruby1.9.1:i386    - Tcl/Tk interface for Ruby 1.9.1
>> p   r-cran-tcltk2              - GNU R package for Tcl/Tk additions
>> p   ruby2.0-tcltk              - Ruby/Tk for Ruby 2.0
>> p   ruby2.0-tcltk:i386         - Ruby/Tk for Ruby 2.0
>>
>> That's the same as what I get on another computer on which tcktl is
>> available, so it didn't surprise me when installing the r-cran-tcktl
>> package didn't help.
>>
>> Where else should I be looking for a difference?
>>
>> TIA
>>
>>
>> --
>> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
>>    ___    Patrick Connolly
>>  {~._.~}                   Great minds discuss ideas
>>  _( Y )_           Average minds discuss events
>> (:_~*~_:)                  Small minds discuss people
>>  (_)-(_)                        ..... Eleanor Roosevelt
>>
>> ~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.
>>
>> ______________________________________________
>> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide
>> http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.