Help

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Help

mohi uddin
Hi,
Good day,
Sir,
I am PhD student and using metaSem by R package 3.6.2. For meta analysis.
I am using tssem. On stage 2, I type install.packages("semPlot")
Require("semPlot")
And then got given below message.

package ‘semPlot’ is not available (for R version 3.6.2)

Plz help me in making model.
Thanks
Sincerely
Mohiyuddin

        [[alternative HTML version deleted]]

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Help

Caitlin Gibbons
Hi.

Not all of us are “Sirs”.



> On Feb 20, 2020, at 3:56 PM, mohi uddin <[hidden email]> wrote:
>
> Hi,
> Good day,
> Sir,
> I am PhD student and using metaSem by R package 3.6.2. For meta analysis.
> I am using tssem. On stage 2, I type install.packages("semPlot")
> Require("semPlot")
> And then got given below message.
>
> package ‘semPlot’ is not available (for R version 3.6.2)
>
> Plz help me in making model.
> Thanks
> Sincerely
> Mohiyuddin
>
>    [[alternative HTML version deleted]]
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Help

John Kane-3
That's okay Caitlin, the Queen will have you on this year's honour's list.

On Thu, 20 Feb 2020 at 18:31, Caitlin Gibbons <[hidden email]>
wrote:

> Hi.
>
> Not all of us are “Sirs”.
>
>
>
> > On Feb 20, 2020, at 3:56 PM, mohi uddin <[hidden email]> wrote:
> >
> > Hi,
> > Good day,
> > Sir,
> > I am PhD student and using metaSem by R package 3.6.2. For meta analysis.
> > I am using tssem. On stage 2, I type install.packages("semPlot")
> > Require("semPlot")
> > And then got given below message.
> >
> > package ‘semPlot’ is not available (for R version 3.6.2)
> >
> > Plz help me in making model.
> > Thanks
> > Sincerely
> > Mohiyuddin
> >
> >    [[alternative HTML version deleted]]
> >
> > ______________________________________________
> > [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> > https://stat.ethz.ch/mailman/listinfo/r-help
> > PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> > and provide commented, minimal, self-contained, reproducible code.
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>


--
John Kane
Kingston ON Canada

        [[alternative HTML version deleted]]

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Help

John Kane-3
In reply to this post by mohi uddin
Are you trying it install the package from within an IDE or working at a
common line level?

Sometimes it seems better to start R on the command line and work there

On Thu, 20 Feb 2020 at 17:56, mohi uddin <[hidden email]> wrote:

> Hi,
> Good day,
> Sir,
> I am PhD student and using metaSem by R package 3.6.2. For meta analysis.
> I am using tssem. On stage 2, I type install.packages("semPlot")
> Require("semPlot")
> And then got given below message.
>
> package ‘semPlot’ is not available (for R version 3.6.2)
>
> Plz help me in making model.
> Thanks
> Sincerely
> Mohiyuddin
>
>         [[alternative HTML version deleted]]
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>


--
John Kane
Kingston ON Canada

        [[alternative HTML version deleted]]

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Help

David Winsemius
In reply to this post by mohi uddin

On 2/20/20 6:32 AM, mohi uddin wrote:
> Hi,
> Good day,
> Sir,
> I am PhD student and using metaSem by R package 3.6.2. For meta analysis.
> I am using tssem. On stage 2, I type install.packages("semPlot")
> Require("semPlot")
> And then got given below message.
>
> package ‘semPlot’ is not available (for R version 3.6.2)

Rhelp is a plain text mailing list. If your PhD program doesn't include
training on how to use a mail client, then you should avail yourself of
the online training that google offers. It is incredibly easy to sent
plaintext messages with gmail.


You should always include your setup, preferably with the output of
sessionInfor()


You should also include the full output of you console session ... not
just the last line.


I just executed:

install.packages("semPlot")

... and got an error message saying the package "OpenMx" had failed to install properly. In the process of getting to that point there was a rather long list of package dependencies that were also installed. I'm on Linux and the install.packages function behaves differently here than it does on OSX or Windoze. There you should always include dependencies=TRUE in the parameters given to `install.packages`.

Since OpenMx failed to install., I decided to try again. Many times packages have dependencies which have dependencies which  ....  ... Turtles all the way down. Well, R only goes only turtle-level down.

OpenMv eventually compiles. It was the longest single package compilations I've ever seen. But finally I saw:

* DONE (OpenMx)

The downloaded source packages are in
        ‘/tmp/Rtmp4ADe86/downloaded_packages’

# So I executed the install.packages again

> install.packages("semPlot")
Installing package into ‘/home/david/R/x86_64-pc-linux-gnu-library/3.5.1’
(as ‘lib’ is unspecified)
trying URL 'https://cloud.r-project.org/src/contrib/semPlot_1.1.2.tar.gz'
Content type 'application/x-gzip' length 75138 bytes (73 KB)
==================================================
downloaded 73 KB

* installing *source* package ‘semPlot’ ...
** package ‘semPlot’ successfully unpacked and MD5 sums checked
** using staged installation
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (semPlot)

The downloaded source packages are in
        ‘/tmp/Rtmp4ADe86/downloaded_packages’

Success.

Best of luck ... and do pay attention to the advice at the top. It's the only way to get beyond perpetual noobism.

--
David.

>
> Plz help me in making model.
> Thanks
> Sincerely
> Mohiyuddin
>
> [[alternative HTML version deleted]]
>
> ______________________________________________
> [hidden email] mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Reply | Threaded
Open this post in threaded view
|

Re: Help

David Winsemius

On 2/20/20 5:10 PM, David Winsemius wrote:

>
> On 2/20/20 6:32 AM, mohi uddin wrote:
>> Hi,
>> Good day,
>> Sir,
>> I am PhD student and using metaSem by R package 3.6.2. For meta
>> analysis.
>> I am using tssem. On stage 2, I type install.packages("semPlot")
>> Require("semPlot")
>> And then got given below message.
>>
>> package ‘semPlot’ is not available (for R version 3.6.2)
>
> Rhelp is a plain text mailing list. If your PhD program doesn't
> include training on how to use a mail client, then you should avail
> yourself of the online training that google offers. It is incredibly
> easy to sent plaintext messages with gmail.
>
>
> You should always include your setup, preferably with the output of
> sessionInfor()
                                           make that
..................sessionInfo()

>
>
> You should also include the full output of you console session ... not
> just the last line.
>
>
> I just executed:
>
> install.packages("semPlot")
>
> ... and got an error message saying the package "OpenMx" had failed to
> install properly. In the process of getting to that point there was a
> rather long list of package dependencies that were also installed. I'm
> on Linux and the install.packages function behaves differently here
> than it does on OSX or Windoze. There you should always include
> dependencies=TRUE in the parameters given to `install.packages`.
>
> Since OpenMx failed to install., I decided to try again. Many times
> packages have dependencies which have dependencies which  ....  ...
> Turtles all the way down. Well, R only goes only turtle-level down.

..............................................................................^one^

>
> OpenMv eventually compiles. It was the longest single package
> compilation I've ever seen. But finally I saw:
>
> * DONE (OpenMx)
>
> The downloaded source packages are in
>     ‘/tmp/Rtmp4ADe86/downloaded_packages’


You probably would not need to compile OpenMx from source I as I needed
to, There is a win.binary version on CRAN.


Again;

Best of luck.


David

>
> # So I executed the install.packages again
>
>> install.packages("semPlot")
> Installing package into ‘/home/david/R/x86_64-pc-linux-gnu-library/3.5.1’
> (as ‘lib’ is unspecified)
> trying URL 'https://cloud.r-project.org/src/contrib/semPlot_1.1.2.tar.gz'
> Content type 'application/x-gzip' length 75138 bytes (73 KB)
> ==================================================
> downloaded 73 KB
>
> * installing *source* package ‘semPlot’ ...
> ** package ‘semPlot’ successfully unpacked and MD5 sums checked
> ** using staged installation
> ** R
> ** inst
> ** byte-compile and prepare package for lazy loading
> ** help
> *** installing help indices
> ** building package indices
> ** testing if installed package can be loaded from temporary location
> ** testing if installed package can be loaded from final location
> ** testing if installed package keeps a record of temporary
> installation path
> * DONE (semPlot)
>
> The downloaded source packages are in
>     ‘/tmp/Rtmp4ADe86/downloaded_packages’
>
> Success.
>
> Best of luck ... and do pay attention to the advice at the top. It's
> the only way to get beyond perpetual noobism.
>

______________________________________________
[hidden email] mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.